How does the Petite Clip work?

Babysense Petite Clip is a highly sensitive motion sensor. When clipped on baby’s diaper the sensor will rest softly on baby’s tummy so it can detect even the slightest of movements. Babysense Petite Clip constantly monitors baby’s movements and activates a gentle vibrating stimulation if no tummy movement is detected at all for a period of 15 seconds. In some cases, such tactile stimulation is enough to reassert baby’s movement, and in this case Petite Clip will revert to monitoring mode. If no further movement is detected for another 5 seconds, a sound and visual alarm is activated.

Petite Clip is a unique safety and reassurance system, alerting in the event of distress or if movements stop, giving critical time to intervene. Petite Clip can be set to sensitive mode to pick up even slighter movements than regular mode. For more reassurance there is a soft flashing light and an optional low-tick feature to gently remind you baby is being constantly monitored.

How does the Babysense 7 work?

Babysense is more than just a commonly known MOVEMENT MONITOR!

All other available devices are only simple movement monitoring devices. Their alarm sounds if movement isn’t sensed after 20 seconds. Thus caregivers will not be notified about potential threats before the actual cessation of movement.

Babysense is a highly sensitive device that monitors and detects even the slightest movements through the mattress. Babysenses’ algorithms register the actual rate of movement, not only its presence or absence. Babysense alarms when no micro-movement is detected for more than 20 seconds or if the movement rate slows to less than 10 movements per minute. Caregivers can be alerted about a potential threat before it strikes, giving critical time to intervene.

The control unit is connected to sensor pads placed between infant’s mattress and crib or bed base. The included hook attaches to the crib bottom so that no wires are exposed to the baby’s environment.

Also, unlike other monitoring devices, only Babysense will not reset. Once the alarm is triggered, it can be stopped only by switching the Babysense monitor off. Recovery of movement can’t stop the alarm. This ensures that even a single “non-movement” episode will alert the parents.